Hand Tools – General Hand Tool Operation

Hand Tools - General Hand Tool Operation

Hand tools are such kinds of tools which are we use or execute on our own without help any power supply or artificial else. We use hand tools for the various purposes of our daily life. Quality tools of different types, including wrenches, cutters, pliers, files, striking tools, struck or hammered tools, vises, screwdrivers, clamps, snips, saws, drills, and knives, etc., we use in any work to easy. These all basically use indoor work. Besides outdoor tools such as garden forks, rakes, and pruning, shears are additional forms of hand tools. Portable power tools are not probably hand tools.

Using tools unintentionally can cause more problems than solutions. Do you have ever seen someone use a screwdriver as a bar for users to support scaffolding instead of jacks? This is just an example of misused tools that can cause accidental injury on the job in-home or anywhere else.

How many times have you seen somebody using a screwdriver as a pry bar? Or concrete blocks being used to support scaffolding instead of jacks and pads? Or someone using a five-gallon bucket as a stepladder? These are only some examples of misused equipment that can result in injury on-the-job or during DIY projects at home. Now we throw down some vigilances you should take at home and at work.


Common Vigilance for Hands-On Projects

Safety priority! Whenever taking on a project where involves manual work is always an innate risk of physical harm. Below are some simple steps to follow to defend yourself.

Use insulated tools – This is of ultimate value if you are going to be working with electricity or near a power supply. Insulated tools defend from electric shock and give easier grip. If you don’t sure, are your tools insulated? Then you think these are not! But, if insulated, these will have a tag by the universal sign with a “1,000 Volts” mark on the handle. So inspection before you start with.

Always protected with safety gear – You should always wear safety glasses when starting on a project. Also, put on a lifting belt and gloves whether you are doing the heavy lifting. Testing each step of your work and ensure the need for safe material before you start.

Hammers are not screwdrivers – Each tool has an individual using procedure and obviously should follow this. Do not break corners of anything by using a wrench handle like a hammer or using a screwdriver like a pry bar. Awkward use of tools like this is very dangerous and also bad for the durability of your tools.

Proper maintenance – Certain that your tools are strong and in expiring order before you start. You probably think a keen saw or knife be more dangerous than a dull one, but dull blades may easily happen more accidents because of their tendency to slip.


How to Use Common Household Tools


To using a hammer, at the other end, you hold the handle, the more force you will put on the object. So if you are hammering a claw, start with appropriate, lower hits when gripping the handle close to the hammer’s head. Once the claw is in placement, hit it in by gripping the hammer at the handle’s end. Swinging from the carpus for control and from the elbow for force. The element you are working with may need a different type of hammer.



Ensure that you have the proper type of head and size which matches the screws you are working with – star, flat, torque, etc. Hold the handle of the screwdriver with one hand, and with the other hand, hold the top of the screwdriver near the screw. Execute pressure with a spin by hand until the screw catches a grip. Then it goes in straight.



Always set up a stepladder on plain ground. Every time be conscious that the hanged metal stick is straight and locked in. Also, ensure the metal steps are parallel according to the ground. Paste the printed warning on the stepladder to not step higher than recalled! If you need to go higher than that point, then increase up the odds that you help to go higher. Do not leave any kinds of tools on the ladder because any bad occurrence may happen for this.


Hand Saws

You should check whether the saw thorns are sharp and the blade is straight. This makes your work easier and cleaner. Firstly make sure to measure after you start hacking away and then draw a pencil line on the place where you are going to cut. Please make a soft, perfectly and straight cut with the line, hold your elbows in by your side. After that, execute too slowly sawing according to the line.


How Do Prepare For a Project?

Whenever you take preparation for a project, especially If it needs specialized equipment. Do not forget to decide which equipments you should need, primary or basic work and major work. Completely thinking about this initiative and make a decision in a timely.

Divide Segmental – First, you should divide your whole project into some segments. Then start your project. Do some study about your project to how you can easily finish and what equipments you should use on which projects.

Conditional Danger – In every work, there might be a chance of occurring danger. So you should stock enough safe equipment in the workplace while working. Also, follow the safety rules for safety. Check out whether your hand tools are expired. Are those clean enough to use your project? Because expired or old tools are causes many accidents. So ensure your hand tools neat and clean. I find then replace it with a new one. For example, the dull saw blade is injurious, and the old ladder is dangerous for the step up.


Hand Tools and Why They Still Matter

Although everyone has power saws, ladders, drills, planers, and battery power capacity has improved, the basic tools like hammers, screwdrivers, and wrenches will always keep in existence in your toolbox.

Care and maintenance of these tools are sometimes handed over from generation to generation, and they are trying to clean and oiled to keep clean and carefully stored in their basement or garage workshop.

Unfortunately, there are still injuries related to the use of hand tools, and according to the Occupational Safety and Health Administration (OSHA), there are five basic safety rules that can help prevent dangers when using hand tools:

  1. Keep all the equipment in good condition with regular maintenance and protect this severally.
  2. Use the right tool for work.
  3. Inspect every tool for damage before and after use and also do not use damaged tools.
  4. Control tools according to the manufacturers’ instructions.
  5. Provide the right personal protective equipment and use it properly.


Impact Tools

Examine an impact tool before using it because it causes danger. Search for mushroomed heads, cracks, chips, or other signs of damage or weakness.

Always wear proper eye protection when using impact tools.

Fire is a potential danger that is not always avoided when working with hand tools. Flakes from striking effect tools can enlighten fumes, oxygen, paper, etc., used in the area. Avoid using effective tools near inflammable equipment or steam.


Minimizing Hand Tool Risks

Various injuries cause by hand tools such as burns, sprains, eye injuries, hearing loss, broken bones, scrapes, and pulmonary (lung) disorders.

A lot of airborne dust and particles are created by the conduct of such hand tools. For example, the usage of saws, sandpaper, planes, and saws may create sawdust or drywall powder. Those all relate to many disturbances like short-term disclosure may cause a minor disturbance, while long-term disclosure may cause chronic bronchitis, pneumonia, or other pulmonary disorders. When you are using a tool that creates dust must wear filtering masks and eye protection properly as well as body protection if possible.

The first time, always read the manual to habituate yourself with the tool before operating any power tool. Never start work with power tools without reading the manual is dangerous. Contact the production house for change if the manual does not exist.



  • Always use a tool with proper guidance. You have been trained to use it correctly.
  • Each tool must be rapidly checked each time before and after use, and you must protect yourself with appropriate personal protective equipment.
  • Keep away ever hand tools from children.


What should I avoid when using hand tools?

  1. Do not use any hand equipment for jobs they are not intentional to do. For example, do not use a slot screwdriver as a chisel, pry bar, punch, or wrenches as hammers because wrenches play an option in the role, and besides, hammers play an option out the role.
  2. To apply force or pressure on tools lightly.
  3. Uncut yourself when using cutting tools.
  4.  Do not hold the object in the flat of your hand when using a cutting tool or a screwdriver. Always keep it on a workbench or in-ground/floor.
  5. Always wearing protective gloves to operate hand tools.
  6. Do not throw tools. Serve them hand to hand, handle first, then directly to other workers.
  7. Just carry tools in a way that not interferes with using both hands, only a single hand on a ladder, while climbing on a structure, or when doing any dangerous work. If working on a ladder, hand equipment should be raised and lowered using a bucket and hand line.
  8. Always carry a sharp tool in the proper bucket or packet, not your pocket.
  9. During electrical work, only use tools that are designed for electrical work (e.g., properly insulated).
  10. Do not leave tools keeping lie around on remote upper-lower structures like a platform or scaffold as they may be bumped and fall.


Proper Tool Maintenance

Hand tools will provide the best service if you take care them. Appropriate attention and routine maintenance of your hand tools increase their sustainability. Increased sustainability used to hand tools makes any home improvement or repair project easier, safer, and more successful. Proper tool care has saved your money because the better they are cared for, the longer they will last.

Dust, dirt, and grime can bring your power tools to a damaged fellow if left unchecked over time. Wipe them clean with a rag after every work has been completed and then store them. Deep clean repeatedly by using a dank cloth. Get into exhausts and intakes and other hard-to-clean areas with lightly oiled cotton buds or something like slender tools.

Using an air compressor or a can of compressed air to blow dust and grime into vents and crevices is very effective in removing dirt and dust from inside tools.

For tools that use filters, change the filters as a mark by the manufacturer’s instructions.


Store Tools Properly

A proper storage system is very much important for hand tools. A toolbox, storage container, shelving unit, or a combination of all of these can be used to keep your tools protected and in peak condition, but it is quite tricky to keep a small back with some very important and portable tools to peak. Ideally, your storage units should be kept somewhere with minimal exposure to moisture and a cleaning position with temperature changes. Remember to keep tools in their respective places or hung them on definite hangers when a job has been completed.

Use a small tool bag for the tools you use quickly shift for simple jobs around the house. The rest of your tool can remain in your main toolbox.

You should have space where you examine your tools and perform necessary maintenance tasks, such as a worktable. Wrapping the table with newspaper or plastic sheeting to protect the table and make it easier to clean up after you’re done with the job.

Garden tools and hang lawns, such as shovels and rakes, on a wall to get them off of the ground and to protect them from moisture. Otherwise, rust will cover the tool.


What’s the difference between hand tools and power tools?

Hand tools are actually what they sound like – tools that need manual labor to use. Power tools have a power source that allows them to operate automatically and without human interference.

That power source may be a battery or air compressor, or electricity.

Power tools also have motors and other mechanisms with machines that allow them to run more effectively and more powerfully than their manual mechanisms.

Naturally, manual tools have few moving parts, and their designs are simple.

On the other hand, power tools use a source of power to run, while hand tools only depend on human power to operate.


The Pros of Hand Tools

One of the primary benefits of hand tools is that there is no need to worry about mechanical or computerized or power parts breaking. Hand tools have some moving parts, so they have to last longer than the powered tools.

Hand tools also give users more control through the tool’s movement, which is best for wood engraving and tasks that need fairly described work.

Because hand tools need human power to run, they are always available and work-friendly for use. There is no need to worry about recharging batteries and power outages. These tools can be used any time with or without electricity or any kind of power supply.

With most manual tools being lighter in weight and more impenetrable in size, they are also travel-friendly, and most are portable in the pocket.


The Cons of Hand Tools

The most obvious disadvantage to using hand tools is that they aren’t as powerful as power tools.

It also takes more time(which is so valuable) to complete tasks because of the lackings of power. Suppose a hammer can take two or three hits to drive a nail into a piece of wood, but on the other hand, a nail gun takes just one hit of the trigger to drive a nail.

Hand tool’s work is also less accurate than power tool’s work because they require human power and don’t move at the same high speeds as power tools move.


Best Hand Tool Brands Overall

Let’s first start by looking below what are the best hand tool brands overall. Later on, I will also look at a couple of different hand tools appropriately.



Irwin Industrial Tools is one of the various hand tool brands on the market today, according to public opinion. However, back in the 20th century, this brand was well-known for the non-defective quality of its tool lines.  The iconic “Vise-Grip,” which was invented by one of the company’s early blacksmiths as the first-ever locking pliers, includes this.

However, since 2008, the brand spreads its production overseas to China in order to remain competitive in the current market. Their products’ quality has not seen a remarkable drop since then, though their popularity has run to wane.

Irwin is very popular as a company for its undoubted sustainable products. In particular, their bar clamps are still considered the most reliable and hearty available to consumers today. Besides regular quality tools, Irwin’s saw blades and drill bits are also only one choice for many craftsmen and contractors.



Stanley is one of America’s oldest hand tools brands, with an enriched history that stretches all the way back to 1843. Though officially it has been a part of the mingled Stanley Black & Decker since 2010, this brand casual much of its previous success in the marketplace.

To be specific, Stanley is very much renowned for making almost every type of hand tool imaginable. Levels, wrecking bars, hammers, screwdrivers, cutting tools – you name it, and there’s a good opportunity that Stanley makes it.

In fact, when it comes to definite prime base tools in today’s toolboxes, Stanley was the first to introduce them into the market. This was certainly true for the locking tape measure, which remains one of the brand’s most popular products.

Stanley, as a brand, hasn’t rested on its laurels, either.

They continue to lead the hand tool market’s trend towards introducing more digital equipment and also besides their customer and marketing policy. This can be seen in their digital leveling systems, which are severely accurate and reliable. They’ve also innovated in minute ways as well, such as packing extra sustainability into their carbide blades.



The craftsman may be one of the best-known hand tool brands in the US, not least because they spent decades dominating the market through their primary sales channel. To be specific, Craftsman started as an in-house brand for Sears, making them exceptionally accessible and competitive during the mega-retailers heyday.

That might be said, Craftsman’s popularity brings with the fortunes of Sears. It also is a warning for similar hand tool manufacturers in competition. That can be said of their product’s quality, which has unstable often due to the manner in which Sears contracted out the manufacturing of the tools.

At times, they were authentically identical to hand tools made for New Britain, Stanley, and Western Forge, as a result.

Despite all of these variations, the Craftsman brand remains a prime brand in the modern hand tool market. In particular, Craftsman’s numerous toolsets are popular for their capability, size, and variety. These sets include all things from wrenches and screwdrivers to drill bits and ratchets.

Simply put, poking with a single hand tool brand in today’s market simply is not worth the effort.

Back in the day, this made a lot of sense given the capability of brands like Snap-On or the warranties carried by brands like Craftsman. But many of those exclusive brands like them have melted away with time. Now, all you should be focused on is how each particular tool performs in the field.

It’s seriously hard to realize that there are this many hand tool brands on the market today. But there are, so you have to be able to tell the difference between the brands when shopping for new hand tools.

With the information in this guide with reference, you should now be able to shop like an intelligent craftsman and find a hand tool brand that fills your needs and your budget.

2 thoughts on “Hand Tools – General Hand Tool Operation”

  1. Thank you very much for this beautiful article. This is really great & helpful. I appreciate your thoughts & ideas. well done.

Leave a Reply

Your email address will not be published.